Ipevo VZ-1 HD User Manual download pdf (Page 35)

Troubleshooting and FAQ

VZ-1 HD will not turn on (PC or Mac).

Ensure VZ-1 HD is plugged in to your computer with the USB cord.

Ensure the Presenter software from the CD-ROM is installed and running.

Ensure you have pressed the power button on the front of the stand.

Unplug the camera, exit the software, restart the software, and replug in the camera. Press the

power button.

VZ-1 HD will not turn on (VGA monitor or projector).

Ensure VZ-1 HD is plugged in to your device with a VGA cable (not included).

Ensure the USB power adapter is connected and plugged into the wall.

Ensure you have pressed the power button on the front of the stand.

Unplug and replug in the camera. Press the power button.

No image shows up/the screen is dark (VGA monitor or projector).

Ensure VZ-1 HD is plugged in to your device with a VGA cable (not included).

Ensure the USB power adapter is connected and plugged into the wall.

Ensure you have pressed the power button on the front of the stand.

Select "Auto. Res." with the resolution selector on the front of the stand.

If still no image, select other choices with the resolution selector.

Unplug and replug in the camera. Press the power button.

There is a setting change I don't want that I can't get rid of.

Access the Advanced Settings, and click No on “Keep Camera Mode Settings.” Then, exit and restart the

application.

The image is too dark/too bright.

Adjust the exposure.

See Pages 21 and 22

for techniques.

The image is out of focus or pixelated.

Press the focus button to bring the subject into sharp focus.

See Page 23

for focus techniques.

Increase resolution for an image with more picture information.

See Page 24.

1 2 ... 30 31 32 33 34 35 36 37

No comments

Ipevo VZ-1 HD User Manual Page 35